Product Description http://xhjd2007.c029.com: wire solid wire (stick) welding method and solid wire (rod) instructions for use, solid wire (stick) welding so-called solid wire (rod) is through a certain processing method suitable for fusion welding methods available according to the user requirements of a certain diameter coils (rolls) or rod (straight strip) solid core (wire cross-section are the same density and composition of the material) wire wire (rod). The wire is generally suitable for MIG arc welding (GWAW), submerged arc welding (SAW); welding rods are generally applicable to tungsten inert gas shielded arc welding (TIG), such as the particles arc welding (PAW) method. Second, the selection of welding wire method, their field of application and characteristics inconsistent; the general CO2 welding, MAG welding, MIG welding is characterized by high efficiency; all-position welding; low cost; wind resistance; outdoor work poor ability; the cost increase as the inert gas content increases, a corresponding increase in performance of welded joints. Submerged arc welding with high efficiency, automation, low cost, weldability, the suitable flat welding and small-angle slope welding, not suitable for sheet metal welding characteristics. TIG and PAW welding due to the heat source poly neutral, suitable for sheet metal welding, narrow heat affected zone, the excellent performance of welded joints, welding efficiency is not high. The user should be based on the requirements of the performance of welded joints considering the cost of welding, the welding efficiency, weldability when choosing a welding method; corresponding option of the weldment welding process and the physical and chemical properties, weldability, beautiful, welding efficiency wire and supporting materials. Wire products we provide physical and chemical properties is based on corresponding the welding consumables national standards ministerial standards or national authority standards melting the deposited metal performance and wire inspection ingredients as a quality certificate issued by the project, with a wide range of market users in a variety of different The welding method is inconsistent, should be based on the characteristics and requirements of the welding fully comprehensive welding procedure to select wire varieties and specifications. Wire preservation and rust measures can be divided according to the corrosion resistance to rust carbon steel and low alloy steels series and stainless steel wire series. For the former, we have adopted a surface treatment, copper, or rust and other mechanical anti-rust treatment; these technologies to ensure the welding wire in a dry, ventilated environment stored in a long time and can not afford to rust. However, due to the access and use of the process is not strict management and control, will inevitably lead to the wire accelerate rust in the harsh environment, which will affect the welding process and weld mechanical properties, it should note the following points in the preservation and use of the process of the wire : A: wire storage warehouse should have a dry and well-ventilated environment (suggestion: the Treasury room temperature 10-40 ° C, relative humidity of 60%); avoid wet; refused to water, acids, alkalis and other liquid and volatile corrosive substances these substances exist, should not coexist on the same Treasury; B: wire should be placed on wooden pallets or metal and wooden frames can not be placed directly on the floor or close to the wall (wire from the ground and walls should be at least greater than 250 mm);